未来材料创制中心

undefined

王乐耘

  • 教育背景

  • 工作经历

  • 研究方向

  • 荣誉奖励/承担项目

  • 代表性论文和著作

  • 2007-2011   美国密歇根州立大学  博士

  • 2003-2007   清华大学  学士

  • 2020-至今   上海交通大学材料科学与工程学院  研究员

  • 2015-2020   上海交通大学材料科学与工程学院  特别研究员

  • 2014-2015   德国HZG研究中心  研究员/洪堡学者

  • 2011-2013   美国阿贡国家实验室  博士后

  • 轻量化材料;材料基因工程;同步辐射技术;增材制造

  • 2022 国际先进材料学会会士 (IAAM Fellow)

  • 2022 全国有色金属优秀青年科技奖

  • 2020 上海市青年科技启明星

  • 2019 教育部青年长江学者

  • 2017 上海交通大学教学成果特等奖

  • 2016 上海市浦江人才

  • 2015 美国材料学会(ASM) Henry Marion Howe最佳论文奖

  • L. Wang*, Z. Song, X. Zhang, J.-S. Park, J. Almer, G. Zhu, Y. Chen, Q. Li, X. Zeng, Y. Li, “Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion”, Additive Manufacturing, 52 (2022) 102656.

  • S. Zhang, L. Wang*, G. Zhu, M. Diehl, A. Maldar, X. Shang, X. Zeng, “Predicting grain boundary damage by machine learning”, Int J Plasticity, 150 (2022) 103186.

  • L. Wang*, Z. Lu, H. Li, Z. Zheng, G. Zhu, J.-S. Park, X. Zeng, T.R. Bieler, “Evaluating the Taylor hardening model in polycrystalline Ti using high energy X-ray diffraction microscopy”, Scripta Materialia, 195 (2021) 113743.

  • G. Zhu, L. Wang*, Y. Sun, X. Shang, J. Wang, H. Wang**, X. Zeng, “Grain-size effect on the deformation of Mg–3Al–3Sn alloy: Experiments and elastic-viscoplastic self-consistent modeling”, Int J Plasticity, 143 (2021) 103018.

  • Y. Liu, L. Wang*, H. Zhang, G. Zhu, J. Wang, Y. Zhang, X. Zeng, “Accelerated Development of High-Strength Magnesium Alloys by Machine Learning”, Metall. Mater. Trans. A, 52 (2021) 943-954.

  • G. Zhu, L. Wang*, J. Wang, J. Wang, J.-S. Park, X. Zeng, “Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates”, Acta Materialia, 200 (2020) 236-245.

  • D. Zhang, L. Wang*, H. Zhang, A. Maldar, G. Zhu, W. Chen, J.-S. Park, J. Wang, X. Zeng, “Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization”, Acta Materialia, 189 (2020) 93-104.

  • G. Zhu, L. Wang*, H. Zhou, J. Wang, Y. Shen, P. Tu, H. Zhu, W. Liu, P. Jin, X. Zeng**, “Improving ductility of a Mg alloy via non-basal slip induced by Ca addition”, Int J Plasticity, 120 (2019) 164-179.

  • L. Wang*, Z. Huang, H. Wang, A. Maldar, S. Yi, J.-S. Park, P. Kenesei, E. Lilleodden, X. Zeng**, "Study of slip activity in a Mg-Y alloy by in situ high energy X-ray diffraction microscopy and elastic viscoplastic self-consistent modeling", Acta Materialia, 155 (2018) 138-152.

  • L. Wang*, Z. Zheng, H. Phukan, P. Kenesei, J.S. Park, J. Lind, R.M. Suter, T.R. Bieler, "Direct measurement of critical resolved shear stress of prismatic and basal slip in polycrystalline Ti using high energy X-ray diffraction microscopy", Acta Materialia, 132 (2017) 598-610.